Installation Requirements
The Miele CM6360 must be installed on a level, stable
surface capable of supporting its full operating weight.
Ensure adequate ventilation clearance as specified in the
installation diagram on page 4.
Connect to a correctly rated power supply -- refer to the data plate for voltage
and amperage requirements.
Plumbing connections (where applicable) must comply with local building regulations and
be completed by a qualified professional.
First Use
Before first use, run the Miele CM6360
through an empty cycle to clean the drum and internal components.
Remove all packaging materials, transit bolts,
and protective films before operating.
Set the clock and any regional settings via the control panel as described
in Chapter 2.
Register your appliance on the Miele website to activate the full manufacturer
warranty.
Operating Programs
The Miele CM6360 offers a range of programmes designed for
different load types and energy efficiency levels.
Eco mode reduces energy and water consumption by up to 40%
compared to standard cycles.
Quick wash cycles are suitable for lightly soiled loads and complete in under 30
minutes.
Refer to the programme guide in Section 3 for a full list of settings, temperatures, and spin
speeds.
Cleaning & Maintenance
Clean the door seal and detergent drawer of your Miele
CM6360 monthly to prevent mould and odour build-up.
Run a maintenance wash at 60 degrees Celsius with a drum
cleaning tablet every 3 months.
The filter should be checked and cleaned after every 10 cycles to maintain
drainage performance.
Descale the appliance every 3 months in hard water areas using a Miele-approved descaling
agent.
Error Codes & Troubleshooting
Error codes on the Miele CM6360 display indicate
specific faults -- consult the error code table in Appendix A.
E1/F1 errors typically relate to water supply
issues -- check the inlet hose and water pressure.
If the appliance does not start, verify the door is fully
closed and the child lock is not activated.
For persistent faults not resolved by the troubleshooting guide,
contact Miele customer service with your model and serial number.
Miele / Appliance
Installation Requirements
The Miele CM7750 must be installed on a level, stable
surface capable of supporting its full operating weight.
Ensure adequate ventilation clearance as specified in the
installation diagram on page 4.
Connect to a correctly rated power supply -- refer to the data plate for voltage
and amperage requirements.
Plumbing connections (where applicable) must comply with local building regulations and
be completed by a qualified professional.
First Use
Before first use, run the Miele CM7750
through an empty cycle to clean the drum and internal components.
Remove all packaging materials, transit bolts,
and protective films before operating.
Set the clock and any regional settings via the control panel as described
in Chapter 2.
Register your appliance on the Miele website to activate the full manufacturer
warranty.
Operating Programs
The Miele CM7750 offers a range of programmes designed for
different load types and energy efficiency levels.
Eco mode reduces energy and water consumption by up to 40%
compared to standard cycles.
Quick wash cycles are suitable for lightly soiled loads and complete in under 30
minutes.
Refer to the programme guide in Section 3 for a full list of settings, temperatures, and spin
speeds.
Cleaning & Maintenance
Clean the door seal and detergent drawer of your Miele
CM7750 monthly to prevent mould and odour build-up.
Run a maintenance wash at 60 degrees Celsius with a drum
cleaning tablet every 3 months.
The filter should be checked and cleaned after every 10 cycles to maintain
drainage performance.
Descale the appliance every 3 months in hard water areas using a Miele-approved descaling
agent.
Error Codes & Troubleshooting
Error codes on the Miele CM7750 display indicate
specific faults -- consult the error code table in Appendix A.
E1/F1 errors typically relate to water supply
issues -- check the inlet hose and water pressure.
If the appliance does not start, verify the door is fully
closed and the child lock is not activated.
For persistent faults not resolved by the troubleshooting guide,
contact Miele customer service with your model and serial number.
Miele / Appliance
Installation Requirements
The Miele CVA6805 must be installed on a level, stable
surface capable of supporting its full operating weight.
Ensure adequate ventilation clearance as specified in the
installation diagram on page 4.
Connect to a correctly rated power supply -- refer to the data plate for voltage
and amperage requirements.
Plumbing connections (where applicable) must comply with local building regulations and
be completed by a qualified professional.
First Use
Before first use, run the Miele CVA6805
through an empty cycle to clean the drum and internal components.
Remove all packaging materials, transit bolts,
and protective films before operating.
Set the clock and any regional settings via the control panel as described
in Chapter 2.
Register your appliance on the Miele website to activate the full manufacturer
warranty.
Operating Programs
The Miele CVA6805 offers a range of programmes designed for
different load types and energy efficiency levels.
Eco mode reduces energy and water consumption by up to 40%
compared to standard cycles.
Quick wash cycles are suitable for lightly soiled loads and complete in under 30
minutes.
Refer to the programme guide in Section 3 for a full list of settings, temperatures, and spin
speeds.
Cleaning & Maintenance
Clean the door seal and detergent drawer of your Miele
CVA6805 monthly to prevent mould and odour build-up.
Run a maintenance wash at 60 degrees Celsius with a drum
cleaning tablet every 3 months.
The filter should be checked and cleaned after every 10 cycles to maintain
drainage performance.
Descale the appliance every 3 months in hard water areas using a Miele-approved descaling
agent.
Error Codes & Troubleshooting
Error codes on the Miele CVA6805 display indicate
specific faults -- consult the error code table in Appendix A.
E1/F1 errors typically relate to water supply
issues -- check the inlet hose and water pressure.
If the appliance does not start, verify the door is fully
closed and the child lock is not activated.
For persistent faults not resolved by the troubleshooting guide,
contact Miele customer service with your model and serial number.
Miele / Appliance