Installation Requirements
The Electrolux EEA17200L must be installed on a level,
stable surface capable of supporting its full operating weight.
Ensure adequate ventilation clearance as specified
in the installation diagram on page 4.
Connect to a correctly rated power supply -- refer to the data plate for
voltage and amperage requirements.
Plumbing connections (where applicable) must comply with local building
regulations and be completed by a qualified professional.
First Use
Before first use, run
the Electrolux EEA17200L through an empty cycle to clean the drum and internal components.
Remove all packaging
materials, transit bolts, and protective films before operating.
Set the clock and any regional settings via the
control panel as described in Chapter 2.
Register your appliance on the Electrolux website to activate the full
manufacturer warranty.
Operating Programs
The Electrolux EEA17200L offers a range of
programmes designed for different load types and energy efficiency levels.
Eco mode reduces energy and water
consumption by up to 40% compared to standard cycles.
Quick wash cycles are suitable for lightly soiled loads and
complete in under 30 minutes.
Refer to the programme guide in Section 3 for a full list of settings, temperatures,
and spin speeds.
Cleaning & Maintenance
Clean the door seal and detergent drawer of your
Electrolux EEA17200L monthly to prevent mould and odour build-up.
Run a maintenance wash at 60 degrees Celsius
with a drum cleaning tablet every 3 months.
The filter should be checked and cleaned after every 10 cycles to
maintain drainage performance.
Descale the appliance every 3 months in hard water areas using a
Electrolux-approved descaling agent.
Error Codes & Troubleshooting
Error codes on the
Electrolux EEA17200L display indicate specific faults -- consult the error code table in Appendix A.
E1/F1 errors
typically relate to water supply issues -- check the inlet hose and water pressure.
If the appliance does not
start, verify the door is fully closed and the child lock is not activated.
For persistent faults not resolved by
the troubleshooting guide, contact Electrolux customer service with your model and serial number.
Electrolux / Appliance
Installation Requirements
The Electrolux EES47200L must be installed on a level,
stable surface capable of supporting its full operating weight.
Ensure adequate ventilation clearance as specified
in the installation diagram on page 4.
Connect to a correctly rated power supply -- refer to the data plate for
voltage and amperage requirements.
Plumbing connections (where applicable) must comply with local building
regulations and be completed by a qualified professional.
First Use
Before first use, run
the Electrolux EES47200L through an empty cycle to clean the drum and internal components.
Remove all packaging
materials, transit bolts, and protective films before operating.
Set the clock and any regional settings via the
control panel as described in Chapter 2.
Register your appliance on the Electrolux website to activate the full
manufacturer warranty.
Operating Programs
The Electrolux EES47200L offers a range of
programmes designed for different load types and energy efficiency levels.
Eco mode reduces energy and water
consumption by up to 40% compared to standard cycles.
Quick wash cycles are suitable for lightly soiled loads and
complete in under 30 minutes.
Refer to the programme guide in Section 3 for a full list of settings, temperatures,
and spin speeds.
Cleaning & Maintenance
Clean the door seal and detergent drawer of your
Electrolux EES47200L monthly to prevent mould and odour build-up.
Run a maintenance wash at 60 degrees Celsius
with a drum cleaning tablet every 3 months.
The filter should be checked and cleaned after every 10 cycles to
maintain drainage performance.
Descale the appliance every 3 months in hard water areas using a
Electrolux-approved descaling agent.
Error Codes & Troubleshooting
Error codes on the
Electrolux EES47200L display indicate specific faults -- consult the error code table in Appendix A.
E1/F1 errors
typically relate to water supply issues -- check the inlet hose and water pressure.
If the appliance does not
start, verify the door is fully closed and the child lock is not activated.
For persistent faults not resolved by
the troubleshooting guide, contact Electrolux customer service with your model and serial number.
Electrolux / Appliance
Installation Requirements
The Electrolux EH6AN427B must be installed on a level,
stable surface capable of supporting its full operating weight.
Ensure adequate ventilation clearance as specified
in the installation diagram on page 4.
Connect to a correctly rated power supply -- refer to the data plate for
voltage and amperage requirements.
Plumbing connections (where applicable) must comply with local building
regulations and be completed by a qualified professional.
First Use
Before first use, run
the Electrolux EH6AN427B through an empty cycle to clean the drum and internal components.
Remove all packaging
materials, transit bolts, and protective films before operating.
Set the clock and any regional settings via the
control panel as described in Chapter 2.
Register your appliance on the Electrolux website to activate the full
manufacturer warranty.
Operating Programs
The Electrolux EH6AN427B offers a range of
programmes designed for different load types and energy efficiency levels.
Eco mode reduces energy and water
consumption by up to 40% compared to standard cycles.
Quick wash cycles are suitable for lightly soiled loads and
complete in under 30 minutes.
Refer to the programme guide in Section 3 for a full list of settings, temperatures,
and spin speeds.
Cleaning & Maintenance
Clean the door seal and detergent drawer of your
Electrolux EH6AN427B monthly to prevent mould and odour build-up.
Run a maintenance wash at 60 degrees Celsius
with a drum cleaning tablet every 3 months.
The filter should be checked and cleaned after every 10 cycles to
maintain drainage performance.
Descale the appliance every 3 months in hard water areas using a
Electrolux-approved descaling agent.
Error Codes & Troubleshooting
Error codes on the
Electrolux EH6AN427B display indicate specific faults -- consult the error code table in Appendix A.
E1/F1 errors
typically relate to water supply issues -- check the inlet hose and water pressure.
If the appliance does not
start, verify the door is fully closed and the child lock is not activated.
For persistent faults not resolved by
the troubleshooting guide, contact Electrolux customer service with your model and serial number.
Electrolux / Appliance